CYLINDER HEAD GASKET – Remove & Replace – [Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.]
THERMOSTAT – Remove & Replace – Mfr Body CD MP w/Housing –
WATER PUMP – Remove & Replace – Mfr Body CD MP w/Housing,Complete Assembly
MACHINE SHOP – resurface & Reseal
CONTROL ARM – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. If Camber and/ or Caster are not within Spec and adjustment can not be perform because of special equipment prepare estimate, do advise costumer.Set Front toe. Remove alignment equipment. Road test Vehicle.
Azucena R. gave our service a 5 star review on 5/31/2025
Performed Inspection, no obvious signs of faults. NO MIL. Performed 20-30 min road test, returned to shop and restart normal. attempted again, results still normal. following day went to retest and vehicle failed to start, very weak crank noticed. performed battery load test. Battery Failed. Recommend to begin by replacing battery.
Replace battery. Clean and inspect terminals & cables. Test charging system: _13.9_Volts
Alpay A. gave our service a 5 star review on 4/16/2025
Burn clutch odor Exsecive material of clutch found by transmission housing as well as strong odor of burn clutch material Burn surface of parking noted on shoes material.
Parking brake cleaning and adjustment
Luis A. gave our service a 5 star review on 12/15/2022